Krempel

PSG is a distributor of Krempel’s range of tooling prepregs. As a family-owned company, the KREMPEL-GROUP is an independent producer of high quality semi-finished products and a leading global systems supplier modern materials. The group enjoys an excellent reputation worldwide and is among the global market leaders in many areas with its electric insulations,...

Gurit

Gurit has established itself as a developer and innovator in the composites industry and positioned itself as the leading global supplier of composite materials, engineering services, tooling equipment, and select parts and systems. Over 30 years experience in the practical application of composites across various market sectors and projects, from small parts to large-scale...

Semco Standard Nozzles

PPG Aerospace  These disposable nozzles are precision molded and have a 1/4″ NPT male thread to fit Semco 1, 2.5,6,8,12,20,32 oz., and 1/10 gallon disposable cartridges.  A wide range of lengths and orifice sizes are available to better meet your application needs.  Nozzles can be bent to varying degrees, however minimum order, lead time and...

Semco Model 250-A Gun

PPG AerospaceThe Semco® model 250-A sealant gun is the standard of the aerospace and electronics industries. It is designed for the quiet, pneumatic application of sealants, adhesives, potting compounds, and other materials packaged in Semco® disposable cartridges or Semkit® packages for multi-component materials. The Semco® model 250-A gun is available with retainers to fit standard...

Semco Model 250-B Gun

PPG AerospaceThe Semco® model 250-B handleless sealant gun is the new standard of the aerospace and electronics industries. It is designed for the quiet, pneumatic application of sealants, adhesives, potting compounds, and other materials packaged in Semco® disposable cartridges or Semkit® packages for multi-component materials. The Semco® model 250-B gun is available with retainers to...

Semco Sealant Smoothing Tools

PPG AerospaceThese special reinforced plastic spatulas and spreaders are for tooling and smoothing sealants and adhesives.   Please contact us if you require further information on any of these products.

SG800

Description: High temperature Primerless metal bonder.Low bondline read through capability.Elevated service temperature of 121 degree C Colour:Off White & Black Working time / min: 4 – 16 Fixture time / min: 12-30 Ratio A:B Volume (weight): 10:1 Viscosity (10³cps) A Comp / B Comp: A:150 – 250 B: 60 – 120 Tensile Strength MPa...

Ransflex Electrostatic Applicator

Ergonomic fit, feel, balance and controls Operators experience less stress on joints and muscles which has proven to lower the risk of RSi and the impact of physical strain, reducing operator fatigue. Redesigned sleek and smooth exterior Makes cleaning and maintenance fast and easy whilst protecting key components. Triple Turbine Protection Three phases of...

Flashtape 200

Flashtape 200 range is made of polyester tape backed with a fully pressure silicone adhesive or with an acrylic rubber adhesive (A). Flashtape 200 is commonly used to keep all bagging materials plies in place like peel ply, release film and breathers. Flashtape 200 is also used to protect tooling parts and some component...

LG230

LG230 is a high temperature sealant tape suitable for autoclave applications up to 232℃(450 ℉). LG230 exhibits excellent characteristics and is the result of a long research performed in our R&D department. LG230 is easy to use for making vacuum bag at room temperature, excellent at high temperature and high pressure achieving safe cures...

LG2000

Excellent tackiness, high temperature tape. Ideally suited to compaction operations at high temperature of 199℃(390 ℉) and seal applications and widely used in autoclave process. Material compatible with most laminate(including composites tools)and film materials. It has slightly lower tack and excellent clean-up on any surface.     Please contact us if you require further information...

LG150

LG150 is a low/medium temperature sealant tape used for vacuum bag confection. LG150 is successfully used in industries like Wind Energy and Marine for infusion process. It could be also used in other industries for room temperature debulking cycles and low temperature/low pressure curing cycles. LG150 exhibits good adhesion (tack) properties and stick easily...

WF330

WF330 is a non woven polyester felt widely used in vacuum bagging process for cures in oven and autoclave up to 205℃(401 ℉) and 7 bars max. This medium weight allows to breath air out from the vacuum bag and bleed excess of resin. In case of large excess of resin two or more...

WF10

WF10 is a non woven polyester felt widely used in vacuum bagging process for cures in oven and autoclave up to 205℃(401 ℉). WF10 is an economical version of our WF330 and despite it could be used up to 205℃(401 ℉)we recommend our customers to use this breather at medium temperature and medium pressure,...

WF150

WF150 is a light non woven felt Polyester bleeder & breather fabrics, widely used in low temperature and middle temperature during debulking/compaction cycles under vacuum only. WF150 helps to breath air outside the vacuum bag and volatile. Its low weight limits its use as both breather and bleeder functions as the same time. Some...

LVF200G

LVF200G is a green-tinted, heat-stabilized, co-extruded film modified from a modified Nylon resin, it is a high temperature Nylon film which can be used for cures up to 205℃(401 ℉), and recommended as a bagging fillm for advanced composite fabrication and other high-temperature/pressure application where softness, workability, pinhole-free and defect-free film are essential.  

LVBF600Y

LVBF600Y is a high strength, high elongation bagging film for low temperature vacuum application. This multilayer co-extruded vacuum bagging film has excellent resistance to polyester and epoxy resins. LVBF600Y is the widest film available on the market and ideal material for, but not only, production of marine and wind energy structures.

R90HA

R85HA/R90HA is an economical but high strength textile release fabric. It is especially used in Hand Lay-up Process and Vacuum Assisted Resin Infusion which are widely applied in wind blade and marine industry. Each of R85HA/R90HA is heat scoured and stabilized at high temperature. They are free of any release agent or pollution and...

R85PA66

R85PA66 is an excellent porous Nylon 66 peel ply or release fabric, it has been heat scoured and stabilized at high temperature. R85PA66 is free of any release agent or pollution and can be used directly on the surface of the part. After curing it peels quite easily without any residue or small pieces...

LRF315

LRF315 is red milky colored high performance PTFE release film exhibiting excellent elongation and can be used for cures up to 315℃(599 ℉)with any of epoxy, BMI resins. Its high elongation avoids bridging issues on the most complex contoured shapes. This release film is supplied in both perforated and non-perforated versions Standard perforations are...

LRF260

LRF260 is an FEP resin base release film. LRF260 exhibits high elongation and excellent release characteristics. It follows all complicated shape of parts without bridging. Suitable for use with all commonly used resin systems up to 260℃(500 ℉). Color deep red makes it easily detectable on cured laminate. This release film is supplied in...

LRF230

LRF230 is an ETFE resin base release film. Color opaque blue makes it easily detectable on cured laminate. LRF230 exhibits high elongation and excellent release characteristics. It follows all complicated shape of parts without bridging. Suitable for use with all commonly used resin systems up to 230℃(446 ℉). This release film is supplied in...

LRF150

LRF150 is economical, high elongation release film. LRF150 exhibits excellent release characteristics and vertical strength resistance, commonly used in resin infusion process. This release film is supplied in both perforated and non-perforated versions Standard perforations are P3 & P6 but other perforations might be possible under request, please ask our technical team.  

RF260

RF260AP is an adhesive PTFE coated glass fabric. Bonding face is covered with a pressure-sensitive silicone adhesive. RF260AP has an excellent temperature resistance, smooth surface, lower coecient of friction. RF260AP is commonly used as a semi-permanent release coating on tools. It could be used also to protect from ash of resins tools equipments at...

RF320PM

RF320PM is a porous PTFE coated glass fabric. RF320PM has a very low resin absorption capacity and then keep breathing during the whole cure of the part when directly laid up on the surface of the part. It peels off without any effort and keeps safe of delamination light composite structure.  RF320PM can be...

VI200E

VI200E is a 200g/m² PE diamond point shape extruded infusion mesh. This media is commonly used to infuse all size of parts in Wind energy and Marine Markets.  VI200E is used to allow resin feeding and spreading over the component. The PE material is compatible with all kind of resin, polyester, vinylester and epoxy...

VI250E

VI250E is a 250g/m² PE diamond point shape extruded infusion mesh. This media is commonly used to infuse all size of parts in Wind energy and Marine Markets. VI250E is used to allow resin feeding and spreading over the component. The PE material is compatible with all  kind of resin, polyester, vinylester and epoxy...

VI160W

VI160W is a 160g/m² PE knitted infusion mesh. This media is commonly used to infuse all size of parts in Wind energy and Marine Markets.  VI160W is used to allow resin feeding and spreading over the component. The PE material is compatible with all kind of resin, polyester, vinylester and epoxy as long as...

Infusion Tubes

Tube is used to distribute vacuum or resin. It is mainly used in resin infusion process to constiture vacuum channel and resine infusion network.      

Flashtape 300

Flashtape-300 high temperature polyimide tape, backed with a fully cured pressure sensitive silicone adhesive applied to one side. Flashtape 300 is commonly used to keep all bagging materials plies in place like peel ply, release film and breathers for cures up to 300℃(572 ℉).  Flashtape 300 is also used to protect tooling parts and...

MC – 780 C2

NAFTOSEAL® MC-780 Class C is a two-component, manganese-dioxide cured, liquid polysulphide polymer system with reduced density, providing excellent fuel tank and fuselage seals. It is designed for interfay surface sealing and wet riveting of fuselage components. It has outstanding resistance to aviation gasoline and jet fuel, as well as resistance to the chemicals and...

MC – 780 A2

NAFTOSEAL® MC-780 Class A is a two-component, manganese-dioxide cured, liquid polysulphide polymer system providing excellent fuel tank and fuselage seals. It has outstanding resistance to aviation gasoline and jet fuel, as well as resistance to chemicals and petroleum products common to the aircraft industry.

MC – 650 B1

AFTOSEAL®MC-650 Class B is a two-component, manganese-dioxide cured, liquid polysulphide polymer system providing excellent fuselage seals. It has outstanding resistance to aviation gasoline and jet fuel, as well as resistance to chemicals and petroleum products common to the aircraft industry.              

MC-780 Class B

Naftoseal® MC- 780 Class B is a two-component, manganese-dioxide cured, low density, liquid polysulphide polymer system providing excellent fuel tank and fuselage seals. It has outstanding resistance to aviation gasoline and jet fuel, as well as resistance to the chemicals and petroleum products used in the aircraft industry.  

MC-630 Class C

Naftoseal® MC630 Class C is a two-component, manganese-dioxide cured, liquid polysulphide polymer system designed for interfay surface sealing and wet riveting of fuselage components. It has outstanding resistance to aviation gasoline and jet fuel, as well as resistance to the chemicals and petroleum products common to the aircraft industry.  

MC-115

Naftoseal® MC-115 is a one component adhesion promoter for polysulfide sealants and is used to prepare metal and solvent resistant painted surfaces prior to the application of polysulfide sealants. It contains a mixture of solvents and surface-activating substances.  

3M AC131 Surface Pre-Treatment

3M3M Surface Pre-Treatment AC-131 is a high-performance non-chromates coating for use on aluminuim, nickel, stainless steel, magnesium and titanium. It is designed for epoxy-based or polyurethane-based coatings. Features: • Superior adhesion of organic coatings to metal substrates • Eliminates chromates from surface treatment process Advantages: • Versatile application methods: brush, spray or dip applied...

Loctite Max 3 – 400 Part D

A liquid, internal release agent for manufacturing of composite materials. It is optimised for the use in polyurethane based matrix resin systems for application in resin injection processes (Resin Transfer Moulding, RTM).  The use of external release agents can be decreased significantly when LOCTITE MAX 3-400 Part D is applied due to its high...

LOCTITE MAX 3

Polyurethane based matrix resin for application in resin injection processes (Resin Transfer Moulding, RTM).  The components are mixed prior to injection into a mould which can be preheated up to 120 degree C.  Cure time can be adjusted with an accelerator in PART A according to customer needs for demoulding times as low as...

Loctite Max 2 – Composite Matrix Resin

This unique polyurethane-based resin LOCTITE MAX 2 is extremely fast curing, ensuring more economic processes and improved throughput. In addition, the high-quality resin increases the quality of the finished part. By enabling you to reduce component weight, it contributes to the reduction of CO2 emissions. Key characteristics  2-componenent PUR matrix resin  Designed for resin...

Loctite BZ9691

Film Adhesive for Composite Bonding  

Loctite BZ9130

Infusion Structural Resin  

Loctite BZ9120

Infusion Structural Resin  

Loctite BZ9110

Infusion Structural Resin    

Loctite BZ9705

Aerospace Structural Prepreg  

Loctite BZ9704

Aerospace Structural Prepreg  

Loctite BZ9703

Aerospace Structural Prepreg  

Top Coat F69

Product information Chromate-free epoxy top coat, water reducible, direct adhesion. The F69 Top Coat offers good corrosion protection and excellent chemical resistance. It is used to protect mountings and sealants, and as a corrosion resistant primer for certain structural parts. Components Base F69 Hardener / Catalyst F69 Thinner Water (AIMS 09-00-003 Grade C) VOC...

Propeel

Propeel is a white pigmented temporary protective coating designed for application to all smooth, clean, metal spray booth walls in order to provide an easy method of booth maintenance The dried film is readily peelable and enables even heavy overspray deposits to be quickly and cleanly removed. Exposed areas can then be touched in or the entire...

Propeel HD

Propeel HD is a viscous liquid drying to give an off-white tough peelable film and is designed to offer a simple yet effective method of maintaining and protecting non-solvent sensitive surfaces from abrasion, paints, oils, resins and dilute acids and alkalis. FEATURES AND BENEFITS * Keeps floors clean making maintenance easy. * Excellence durability....

Aquapeel TS

A clear water based temporary protective coating. Designed to enable transparent protective films to be achieved whilst ensuring good through visibility and providing protection against paint contamination. Product code D4608-25 Please contact us if you require further information on any of these products.

Propeel CL

Propeel CL is a solvent-based, semi-clear, temporary, protective coating designed for application to glass, light fittings and other surfaces that require good visibility. Resistant to solvents once dry. This peelable provides an easy method of maintenance as the dried film collects paint over-spray and is then readily peelable enabling over-spray deposits to be quickly...

Aquapeel

AQUAPEEL is a white pigmented, water based peelable protective coating and is designed for application to paint spray booth walls, etc, so that overspray deposits can be removed quickly and easily. FEATURES & BENEFITS * Dense white film * Easily peelable, good resistance to most paint overspray. * Thixotropic nature minimises ‘running’ * No...

CM0486707 Chrome Hazard Free Urethane Primer

Sherwin Williams  Features & Benefits: Used over a specially designed wash primer (Sherwin-Williams Aerospace CM0484646), this urethane primer provides an outstanding pre-treatment option to the chemical chromate filming process, i.e. Alodine or similar chrome systems. It is chrome and hazard free and eliminates wastewater stream for compliance. This Urethane Primer is a low VOC, fast...

Loctite EA 9845LSC Aero

Suitable for: Specialty Repair – Surfacing Film and Lightning  Strike Size Package Options: Film Adhesive Technology: Epoxy Film Colour (A/B/Mixed): Blue Service Temperature*: 350°F (177°C) Consistency: Film Adhesive Pot Life (450 g mass): 45 days @ 77°F (25°C) Key Features: Accelerated heat cure capability,Complete lightning strike repair solution, Lower weight repair material, Long out-time...

Loctite EA 9845SF Aero

Suitable for: Specialty Repair – Surfacing Film and Lightning  Strike Size Package Options: Film Adhesive Technology: Epoxy Film Colour (A/B/Mixed): Blue Service Temperature*: 350°F (177°C) Consistency: Film Adhesive Pot Life (450 g mass): 45 days @ 77°F (25°C) Key Features: Accelerated heat cure capability, High quality surface finish, Good paint adhesion, Lower weight repair...

Loctite EA 7000 Aero

Suitable for: Out-of-Autoclave Size Package Options: Film Adhesive Technology:  Epoxy film Colour (A/B/Mixed): Green Service Temperature*: 300°F (149°C) Consistency: Film adhesive Pot Life (450g mass): 30 days @ 90°F (32°C) 50% RH Key Features:  Accelerated heat cure capability, Excellent peel and low temperature (- 67F / -55°C) properties, Good co-cure capability with composites,  Qualified...

Loctite EA 9695 Aero

Suitable for: Out-of-Autoclave Size Package Options: Film Adhesive Technology:  Epoxy film Colour (A/B/Mixed): Uncured – Red, Cured – Gold Service Temperature*: 300°F (149°C) Consistency: Film adhesive Pot Life (450g mass): 90 days @ 77°F (25°C) Key Features:  Accelerated heat cure capability, Excellent environmental resistance, Good co-cure capability with composites, Long out-time makes it ideal...

Loctite EA 9396C-2 Aero

Suitable for: High Service Temperature Size Package Options: Quarts Technology: 2 Part Epoxy Colour (A/B/Mixed): Blue / Purple / Violet Service Temperature*: 400°F (204°C) Consistency: Low Viscosity / <35 Poise @ 77°F Pot Life (450g mass): 8hrs  @ 77°F (25°C) Key Features:  Accelerated heat cure capability, Room temperature storage, Low toxicity,  Long pot life, ...

Loctite EA 9394C-2 Aero

Suitable for: High Service Temperature Size Package Options: Clip Pack, Quarts, Cartridge Kits Technology: 2 Part Epoxy Colour (A/B/Mixed): Grey / Purple / Grey-Purple Service Temperature*: 450°F (232°C) Consistency: Moderate Viscosity Pot Life (450g mass): 8hrs  @ 77°F (25°C) Key Features: Accelerated heat cure capability , Excellent strength properties above 400F (204°C) Low toxicity, Long...

Loctite EA 9396 Aero

Suitable for: Laminating and Wet Lay Up Size Package Options: Clip Pack, Pudding Cup, Pints, Quarts, Gallons, Cartridge Kits Technology: 2 Part Epoxy Colour (A/B/Mixed): Blue / Purple / Green Purple Service Temperature*: 350°F (177°C) Consistency: Low Viscosity / 35 Poise @ 77°F (25°C) Pot Life (450g mass): 75-90 min @ 77°F (25°C) Key Features:...

Loctite EA 9390 Aero

Suitable for: Laminating and Wet Lay Up Size Package Options: Clip Pack, Pudding Cup, Pints, Quarts, Cartridge Kits Technology: 2 Part Epoxy Colour (A/B/Mixed): Light Beige / Blue / Light Blue Service Temperature*: 350°F (149°C) Consistency: Low Viscosity /120 – 160 Poise @ 77°F (25°C) Pot Life (450g mass): 2 hrs @ 77°F (25°C) Key...

Loctite EA 956 Aero

Suitable for: Laminating and Wet Lay Up Size Package Options: Clip Pack, Pudding Cup, Pints, Quarts Technology: 2 Part Epoxy Colour (A/B/Mixed): Amber / Amber / Amber Service Temperature*: 300°F (149°C) Consistency: Low Viscosity / 162 Poise @ 77°F (25°C) Pot Life (450g mass): >30 min @ 77°F (25°C) Key Features:  Room temperature cure, Excellent...

Loctite EA 9395 Aero

Suitable for: Bonding, Potting and Filling Size Package Options: Clip Pack,  Quarts, Gallons, Cartridge Kits Technology: 2 Part Epoxy Colour (A/B/Mixed): Light Blue / Olive Brown-Black / Grey-Blue Service Temperature*: 350°F (177°C) Consistency: Thixotropic / 1000-3000 Poise @ 77°F (25°C) Pot Life (450g mass): 95-100 min @ 77°F (25°C) Key Features:  Room temperature cure, Non-Metallic...

Loctite EA 9394 Aero

Suitable for: Bonding, Potting and Filling Size Package Options: Clip Pack, Pudding Cup, Pints, Quarts, Gallons, Cartridge Kits, Dual Cartridge Technology: 2 Part Epoxy Colour (A/B/Mixed): Grey / Black / Grey Service Temperature*: 350°F (177°C) Consistency: Thixotropic / 1600 Poise @ 77°F (25°C) Pot Life (450g mass): 90 min @ 77°F (25°C) Key Features: Room temperature...

Loctite EA 934NA Aero

Suitable for: Bonding, Potting and Filling Size Package Options: Clip Pack, Pudding Cup, Pints, Quarts, Gallons, Cartridge Kits Technology: 2 Part Epoxy Colour (A/B/Mixed): Grey / Amber / Grey Service Temperature*: 300°F (149°C) Consistency: Thixotropic / 800 Poise @ 77°F (25°C) Key Features: Room temperature storage, Room temperature cure, Good gap filler, Develops strength rapidly, Qualified...

Binks DX70 Pump

The Binks DX70 is a high specification, air powered 1:1 ratio double diaphragm pump specifically developed for the direct supply of paint and materials to spray guns. The pump features a unique diaphragm “no-crease” shape for a long and durable life, Binks DX70 also includes a “built in” fluid regulator as standard which ensures...

Loctite Adhesives

LOCTITE 221 ADHESIVE 10ML(MQAD) LOCTITE 221 ADHESIVE 50ML(MQAD) LOCTITE 221 ADHESIVE 250ML(MQAD) LOCTITE 222 ADHESIVE 10ML (AFS) LOCTITE 222 ADHESIVE 50ML(MQAD) LOCTITE 225 THREADLOCK ADH 50ML(MQAD) LOCTITE 241 ADHESIVE 10ML(MQAD) LOCTITE 241 ADHESIVE 50ML(MQAD) LOCTITE 241 ADHESIVE 250ML LOCTITE 242 ADHESIVE 250ML (MQAD) LOCTITE 243 ADHESIVE 10ML LOCTITE 243 ADHESIVE 50ML (COMM) LOCTITE 246...

PF-145HP High Performance Solvent Cleaner

PF-145HP solvent cleaner is a high flash point, full strength cleaning solvent that is   similar in strength to the low flash point and high VOC flammable solvents it is intended to replace. Suitable for use in parts washer and has been identified as a cleaning solvent that can be used in lieu of...

DeVilbiss PROFESSIONAL SPRAY GUN CLEANING KIT

Multi-purpose professional kit suitable for all spray guns. Comprehensive range of brushes and tools. Can be easily hung in the gun cleaning area. Includes cleaning instructions and spray gun oil.    

DeVilbiss JGA HD Spray Gun Range

Renowned DeVilbiss Atomisation Quality Genuine fast application rates Forged aluminium gun body for long life service Light smooth trigger action to reduce operator fatigue Balanced air valve design to improve air flow characteristics. The Finishing World’s favourite spray gun’s just got better with the introduction of the HD (High Demand) range. Over many years...

DeVilbiss SRi HD Gravity Spray Gun

A small scale fine finish spray gun with many practical uses throughout general industry, ergonomically styled for comfort. Choice of HVLP or Trans-Tech® Compliant air caps provide superb atomisation of both solvent and waterbased materials Stainless steel fluid tips & needles Balanced air valve design for lighter trigger pull and improved air flow Lightweight,...

Film Adhesive

3M3M AF163-2K .06x36x50yard  BMS5-101/WAMS50-04/MSRR1051. 3M™ Scotch-Weld™ Structural Adhesive Film AF 163-2 designates a family of thermosetting modified epoxy structural adhesives in film form which are available in a variety of weights with or without a supporting carrier. Scotch-Weld AF 163-2 Films are designed for both solid panel and honeycomb sandwich constructions. High bond strength...

TURCO T-5884

Henkel  Features & Benefits:   TURCO 5884 is a concentrated liquid cleaner which is effective in the removal of oil, salt and solid deposits from compressor blades, guide vanes and rotors of in-service jet engines. Periodic cleaning of these components is necessary to avoid power loss, abnormal temperature increases and increased fuel consumption. TURCO...

Greases, Oils & Hydraulic Fluids

ARMNA G4789 GREASE 400GM CART JETLUBE26203 ANTISEIZE 1LB MOQ 12/CA LUBRIPLATE 930AA GREASE 1.75OZ MCS352B HYDRAULIC ASSY LUB 160ML MX33 SILICONE HI TEMP GREASE 50GM NEVERSEEZ NSBT-8N NI SPEC GDE 8oz NSN165 NEVERSEEZ GREY PASTE 1LB PX7 PETROLEUM JELLY KG ROCOL AEROSPEC 100 GREASE 4.5KG ROCOL ASC251T ANTI SEIZE 500GM ROCOL XG287 AEROSPEC200 GREASE...

Tapes & Abrasives

PERMACEL P212 TAPE 2″ PERMACEL P306L PROTECTION TAPE 18″ PERMACEL P306L PROTECTION TAPE 2″ PERMACEL P55 DOUBLE SIDED TAPE 2″ POLYKEN 108FR BLACK DOUBLE-SIDED FR TAPE 2″ POLYKEN 290FR TAPE 2″ x 36YD ROLL POLYKEN 290FR TAPE 3″ X  36YD ROLL RL6000SA STRETCHTAPE RED 1″ X 20YD ORCON OT-157T TAPE 2″ X 60YD (122157T020)...

Tapes & Abrasives

3M  PSG stocks a wide range of coated abrasive and surface conditioning products. Choose from hand pads, rolls, discs, wheels, belts and various bench area products, together with the complete line of accessories to optimise product performance.  Please contact us if you require further information on any of these products. 3M 365 FIBREGLASS TAPE 2″...

Contact Adhesives

3M FASTBOND 10 CONTACT ADHESIVE 1LTR 3M FASTBOND 10 CONTACT ADHESIVE 5LTR 3M FASTBOND 30 CONTACT ADHESIVE NEUTRAL 1LTR 3M FASTBOND 30 CONTACT ADHESIVE BLUE 1LTR 3M FASTBOND 30 CONTACT ADHESIVE BLUE 5LTR 3M EC776 FUEL RESISTANT COATING 1LTR 3M EC847 ADHESIVE 1LTR 3M EC1300L ADHESIVE 1LTR EVOSTIK 528 ADHESIVE 500ML CAN S708 ADHESIVE...

MOLYKOTE G RAPID PLUS LUB. 50GM TUBE MOLYKOTE GN PLUS COATING 1KG MOLYKOTE G RAPID PLUS BLACK LUB 1KG MOLYKOTE 111 WHITE GREASE 1KG MOLYKOTE 33M GREASE 100GM TUBE MOLYKOTE 3400A COATING 1KG MOLYKOTE 3402C COATING 500GM MOLYKOTE 55M GREASE 100GM TUBE MOLYKOTE D321R LUBRICANT 400ML SPRAY  Please contact us if you require further information...

SKYDROL 500B4 HYDRAULIC FLUID 55GAL SKYDROL 500B4 HYDRAULIC FLUID 5GAL SKYDROL 500B4 HYDRAULIC FLUID 1GAL SKYDROL 500B4 HYDRAULIC FLUID 1QT SKYDROL LD4 HYD FLUID CASE OF 24 QTS SKYDROLLD4 HYD OIL GALLON  Please contact us if you require further information on any of these products.

BP 2197 TURBINE OIL CASE OF 24 QTS BP 2197 TURBINE OIL 55 GALLON DRUM BP 2380 TURBINE OIL CASE OF 24 QTS BP25 ENGINE OIL 55GAL BP274 ENGINE OIL 55GAL  Please contact us if you require further information on any of these products.

MOBIL JET 2 TURBINE OIL 1 QUART MOBIL JET 2 ENGINE OIL 55GAL DRUM MOBIL 254 TURBINE OIL 1 QUART MOBIL JET 254 ENGINE OIL 55GAL DRUM MOBIL 28 GREASE 35LB PAIL MOBIL 28 GREASE 174KG DRUM MOBIL 28 GREASE 50KG MOBIL SHC100 BEARING GREASE 35LB MOBIL SHC100 BEARING GREASE 2KG MOBIL 28 GREASE...

ROYCO 11MS GREASE 1.75LB ROYCO 11MS GREASE 14 OZ CARTRIDGE ROYCO 11MS GREASE 35LB ROYCO 1MS ANTI SEIZE 1.75LB ROYCO 44 LUBRICANT 1.75LB ROYCO 81MS LUBRICATING OIL 1.75LB ROYCO22MS GREASE 1.75LB Please contact us if you require further information on any of these products.

AEROSHELL FLUID 2F 5GAL AEROSHELL FLUID 31 1GAL AEROSHELL FLUID 3 20LTR AEROSHELL FLUID 3  1LTR BOTTLE AEROSHELL FLUID 3 300ML SPRAY AEROSHELL FLUID 41 209LTR DRUM AEROSHELL FLUID 41 20LTR AEROSHELL FLUID 41 5LTR AEROSHELL FLUID 5MA 5GAL AEROSHELL FLUID 71 55GAL DRUM AEROSHELL GREASE 14 3KG AEROSHELL GREASE 14 400ML CARTRIDGE AEROSHELL...

 Please contact us if you require further information on any of these products. PSA529 SILICONE RESIN 500GM RTV102 WHITE SEALANT 310ML CART RTV102 WHITE SEALANT 82.8ML TUBE RTV103 BLACK SEALANT 300ML CART RTV103 BLACK SEALANT 82.8ML TUBE RTV106 RED SEALANT 310ML CART RTV106 RED SEALANT 82.8ML TUBE RTV108 CLEAR SEALANT 300ML CART RTV108 CLEAR SEALANT...

 DC200-200CST SILICONE FLUID 1KG DC 340 COMPOUND 100GM TUBE DC4 SILICONE COMPOUND 5KG DC4 SILICONE COMPOUND 100GM DC7 RELEASE COMPOUND 100GM DC90-006-2 SEALANT 1LB DC93-006-01 SEALANT 1LB DC93-076-2 SEALANT 1LB Q4-2817 SEALANT 5.4OZ TUBE RTV1200 CLEAR PRIMER 500ML RTV1200 RED PRIMER 500ML RTV1201 PRIMER 500ML RTV1204 PRIMER 500ML TIN RTV3140 CLEAR SEALANT 90ML TUBE...

Structural Adhesives

HenkelHYSOL EA901N/AB1 ADHESIVE QUART KIT HYSOL EA9309 ADHESIVE NONASBESTOS QT HYSOL EA9309-3NA ADHESIVE 1 USQT HYSOL EA9330 ADHESIVE 1 QUART HYSOL EA960F ADHESIVE 1 QUART KIT Please contact us if you require further information on any of these products.

Fuel Tank Sealants

PPG Aerospace  CA1000 JOINT COMPOUND(6OZ)130ML CART JC11 JOINTING COMPOUND 250ML TIN JC5A JOINT COMPOUND 6OZ(160ML) CART KS32A EPOXY 1 LITRE KS32B CATALYST 500ML KS33A GREY EPOXY STOPPER 55ML SKIT MASTINOX 6856K YELLOW  160ML SKIT MASTINOX D40 JOINT COMP 160ML SKIT PR1005 BLUE TOPCOAT 500ML(MOQ 10/CS) PR1005CH YELL TOPCOAT 500ML MOQ10/CS PR1005L RED TOPCOAT 500ML (AFS/DTD)...

LR8123 Anti-fret primer

PPG AerospaceFeatures & Benefits: LR8123 is a 2 pack material based on an etching primer with the addition of Molybdenum Disulphide. The LR8123 base component contains Zinc Chromate. Approval DTD 900/4650 Please contact us if you require further information on this product.  

9100/M9001 Low VOC Polyurethane Topcoat – Abrasion Resistant

PPG AerospaceFeatures & Benefits: 9100 is a VOC compliant, chemical resistant polyurethane  topcoat designed to provide a high degree of abrasion resistance. It is intended for use on surfaces where there is a high risk of abrasion due to contact with moving parts. The product has excellent UV durability, chemical resistance and is easy to apply...

7641/3600 P99 Etch Primer

PPG AerospaceFeatures & Benefits: P99 is a two-pack, ambient curing, etch primer designed to provide high resistance to filiform corrosion. P99 promotes excellent adhesion between polyurethane primers such as PAC33 and PAC33CF and a variety of light alloys and steel. Specifications – Approval Airbus AIMS 04.04.012 TN A.007.10113 Dassault IC Specifications – Performance UK MOD...

5467/0000 Pore Filler PU66

PPG AerospaceFeatures & Benefits: PORE FILLER PU 66 5467 is a two-component, polyurethane, low-density, sandable pore filler, characterized by its flexibility and hardness. Improvement of the aspect of laminates: Epoxy glass:  Polyester – glass: Carbon – epoxy: Aramid-epoxy: Specifications – Approval Airbus: AIMS 04-04-011 IC DASSAULT   Please contact us if you require further information on...

5440/**** PU 66 8H Glossy colours

PPG Aerospace Features & Benefits: PU 66 is the two-component flexible polyurethane topcoat of the conventional solids PU 66 system, resistant to filiform corrosion.  PU 66 is used as an internal and external protection and decoration of aircraft, with excellent resistance properties. Resistant to : – Impact – Water soak – Synthetic and mineral lubricants – Phosphate-ester hydraulic...

528X306 Conductive Coatings

PPG AerospaceFeatures & Benefits: DeSoto® conductive coatings are conventional solids, carbon filled, epoxy-amine coatings with controlled conductive properties. These high performance coatings are designed to obtain surface conductivity on non-conductive (composite and other plastics) substrates. Additionally, DeSoto® conductive coatings control static charge bleed-off on radomes, antennas, and other insulative parts. DeSoto® anti-static coating (528X306) is...

519X303 primer DeSoto® High Temperature Coatings

PPG AerospaceFeatures & Benefits: DeSoto® high temperature coatings are organic chemically cured systems that can withstand an operating temperature of 400°F (204C°) and in some applications 450°F (242°C). These high temperature coatings are designed to be applied over aluminum and composite surfaces. DeSoto® high temperature coatings have superior film properties including corrosion resistance.  DeSoto® high...

4355/3600 PAC33 polyurethane primer

PPG AerospaceFeatures & Benefits: PAC33 is a two-component, ambient curing, corrosion resistant polyurethane primer, characterized by high chemical resistance and flexibility, and is designed to be used over P99 etch primer for the exterior finishing of civil aircraft, or to be used over chemically pre-treated alloy for interior or exterior parts. PAC33 is not recommended...

KS35 Chromate Free Epoxy Knifing Stopper

PPG AerospaceFeatures & Benefits: KS35 is a low VOC, chromate-free, Epoxy based knifing stopper for direct application to composites and already primed metallic substrates. Unlike polyester stoppers, KS35 has very good water and Skydrol resistance. The stopper can be overcoated with epoxy primers and polyurethane primers, including waterborne epoxy primer-surfacer CA5413. Specifications – Approval AIMS...

FR80 Epoxy Filler

PPG AerospaceFeatures & Benefits: FR 80 is a two-pack, ambient curing, pigmented epoxy filler possessing excellent durability and chemical resistance. This combination of properties makes it an ideal ground coat to enhance the appearance of either epoxy or polyurethane topcoats used on the external structure of aircraft. FR 80 is approved to the following specification:...

FE 93 polyurethane gloss finish

PPG AerospaceFeatures & Benefits: FE 93 is a two-pack, ambient curing, non-yellowing, polyurethane finish possessing excellent gloss retention and resistance to aircraft fluids including phosphate ester hydraulic oils. For details of compatible primers please consult the FE 93 Scheme Sheets. Fully cured FE 93 possesses excellent fluid resistance and adhesion characteristics. FE 93 is approved...

FE103 flexible polyurethane matt finish

PPG AerospaceFeatures & Benefits: FE103 is a two-pack, ambient curing, non yellowing, flexible polyurethane matt finish possessing good durability, excellent adhesion characteristics and resistance to aircraft fluids including phosphate ester hydraulic oils on suitably primed external surfaces of aircraft. FE103 is approved to the following specifications: BS2X34B, AFS1605, MM0114 Please contact us if you require further...

F580-2080 Improved Adhesion Epoxy Primer

PPG AerospaceFeatures & Benefits: F580-2080 is a 2 component, strontium chromate based epoxy primer  which exhibits excellent adhesion characteristics. It can be applied to suitably pre-treated aluminium alloys and is specifically designed for the long term corrosion protection of aircraft structural components, including fuel tanks. The product exhibits excellent chemical resistance and flexibility and as such is...

CA8311 Low VOC Polyurethane Topcoat, Matt

PPG AerospaceFeatures & Benefits: CA8311 is a high solids, VOC compliant, polyurethane topcoat possessing excellent chemical resistant properties. As such it is intended for use both as an internal topcoat for aircraft structural components as well as an external topcoat for military aircraft and equipment. As an external topcoat CA8311 possesses excellent UV resistance and...

DeSoto® CN series cleaning solvents

PPG AerospaceFeatures & Benefits: CN13 is a fast evaporating cleaning solvent suitable for degreasing and cleaning both painted and bare metal surfaces. It is also suitable for degreasing and cleaning composites and plastics substrates. CN 20 is a cleaning solvent manufactured in accordance with MoD Specification Def Stan 80-67. CN20 is a blend of different...

CA8300 Gloss Low-VOC Polyurethane Finish

PPG AerospaceFeatures & Benefits: CA8300 Desothane HS CA8300 Gloss Low -VOC Polyurethane Finish CA8300 is a high solids Chemical Agent Resistant Coating, based on high durability polyurethane technology. Specifications – Approval Def Stan 80-209/2 Specifications – Performance MIL-PRF-85285, BS2X34 A and B  Please contact us if you require further information on this product.

CA 8000 series Desothane® HS polyurethane topcoats

PPG AerospaceFeatures & Benefits: Desothane® HS topcoats are VOC compliant, polyurethane, chemically cured topcoats used to protect the exterior of aircraft. These topcoats are designed to be applied over conventional as well as high solids epoxy primers to provide maximum performance. Desothane® HS topcoats have excellent durability against weathering, excellent appearance, and are easy to...

CA7012 low VOC chromate free epoxy primer

PPG AerospaceFeatures & Benefits: CA7012 is a two-pack, ambient curing, low VOC, high solids, chromate-free epoxy primer developed for the protection of aluminium and composite structure. Please contact us if you require further information on this product.

ARC 2 abrasion resistant polyurethane finish

PPG AerospaceFeatures & Benefits: ARC 2 is a two pack, ambiant curing, abrasion resistant, polyurethane finish which dries to an eggshell gloss with a slightly textured appearance which has high resistance to abrasion and excellent resistance to aircraft fluids including de-icing fluids and phosphate ester hydraulic oils.  ARC 2 is reinforced with PTFE and is...

CV116 clear polyurethane gloss coat

PPG AerospaceFeatures & Benefits: CV116 (formerly F427-943) is a two-pack, ambient curing, clear, polyurethane gloss coat with a high degree of cross-linking to give maximum chemical and fluid resistance. Fully cured CV116 shows maximum gloss retention on weathering and is designed to give external protection to polyurethane gloss finishes. Specifications – Approval Airbus ABP4-2128, ABP...

CV122 Electrical Insulating and Aerospace Wood Varnish

PPG AerospaceFeatures & Benefits: CV122 is a single-pack, water-resistant, gloss varnish suitable for application as an electrical insulating coating or wood varnish. Specifications – Approval BSX17, Def Stan 80-129/4 type 2 Please contact us if you require further information on this product.

CV123 HS Polyurethane Gloss Varnish

PPG AerospaceFeatures & Benefits: CV 123 is a high solids, low VOC, quick drying, high gloss polyurethane hybrid varnish, based on the polymer technology of CA8300 HS CARC Polyurethane Series. The cured varnish combines exceptional gloss retention and ultra violet light resistance with excellent resistance to aircraft fluids, including Skydrol. CV123 has been designed for...

3M Contact Adhesives

3M3M EC1357 CONTACT ADHESIVE 3M FASTBOND 10 3M FASTBOND 30 3M EC1099 ADHESIVE 3M EC1300L ADHESIVE 3M EC847 ADHESIVE  Please contact us if you require further information on any of these products.

Binks / DeVilbiss Spraygun service and maintenance kits

        Click on the link to view information on Binks and DeVilbiss service kits

Randolph


Henzen


Pro-Visor Air Fed Mask

This air fed respiratory protection system has been purpose designed for all Industrial spray applications.  This technically advanced design provides operators with the perfect combination of safety and comfort with excellent freedom of movement.  The Pro Visor disperses breathing air gently around the lightweight visor at a positive pressure with no misting or discomfort...

PF-QD Quick Drying Cleaning Solvent

PF-QD is a quick drying low odour residue free cleaning solvent for surface cleaning and degreasing in manufacture, maintenance and fabrication activities. Removes general soils, oils, greases and combustion residues during surface preparation in the Aerospace industry and is recommended for switchgear cleaning and degreasing in the Power industry. Available in liquid and pre-saturated...

PF Anti Bac Antibacterial Hand Cleaning Wipe

Independently tested heavy duty antibacterial hand cleaning wipe. Removes oils, greases, combustion and tar residues. Double sided smooth/abrasive wipe for effective, waterless hand cleaning which has been tested and proven effective against Weil’s Disease and E-Coli (EA Technology Performance Report available). Superior hand cleaner that was purposely designed for field use.      ...

PT Degreaser Surface Cleaner

  PT Degreaser surface cleaning solvent is a multi-purpose solvent cleaner in a pre-saturated wipe for pre-paint, pre-bond and pre-sealant surface preparation. Removes grease, tar, oils and general shop soils during OEM and MRO activities. Cloth used is low lint and compliant to AMS 3819C & BMS 15-5F standard. Pre-saturated wipe system eliminates the...

PT Remover Solvent Cleaner & Sealant Remover

  PT Remover is a powerful cleaning solvent in a pre-saturated wipe to remove sealant and adhesive residue during surface cleaning and preparation in Aerospace MRO and OEM. Cloth used is low lint and compliant to AMS 3819C & BMS 15-5F standard. Pre-saturated wipe system eliminates the hazardous storage, transport and logistical issues of...

Critical Clean Cloth

AMS 3819C & Boeing BMS 15-5F Standard Dry Cloth Aerospace standard low lint dry cloth for critical cleaning operations compliant to AMS 3819C & Boeing BMS 15-5F Standard. Cleaning cloth for aircraft primary and secondary structural surfaces. Use in critical cleaning operations where exceptionally low residual surface contamination levels are. required.      ...

PF AquaForte Water Based Surface Cleaner

  PF AquaForte is a non solvent low VOC water based cleaning and degreasing solution for safe surface degreasing and cleaning. Ideal alternative to solvent cleaners for surface preparation during manufacture, fabrication and maintenance activities. Suitable for use in confined spaces.  Available in liquid and pre-saturated wipes with textured cloth for easier cleaning and...

Alocrom 1000 Dip or Brush

Henkel  Features & Benefits: ALODINE 1000 RTU is a ready to use aqueous solution for producing a protective coating on aluminum and its alloys. Light coatings do not significantly change the appearance of the aluminum surface. The coating provides excellent protection for painted and unpainted aluminum and bonds paint well. ALODINE 1000 RTU coating...

Alodine 600 Liquid

Henkel Features & Benefits: ALODINE 600-Brush is a ready to use liquid product which produces a chromate conversion coating on aluminum and its alloys. The coating produced provides excellent protection for unpainted aluminum and bonds paint well. Product code: 149212 Please contact us if you require further information on this product.

Neogene Product Range

NeogeneC85 Product Range Nitro-Cellulose Air Drying Finish Features & Benefits: a high quality half hour drying synthetic nitro-cellulose range can be supplied as a pigmented paint or a transparent lacquer specially formulated to combine the speed of dry of a normal nitro-cellulose enamel with the extra film strength and durability of a quick drying...

Mäder Overview

MäderPassenger Train Exteriors The Mäder Group has developed a large variety of waterborne and conventional systems for the protection and decoration of passenger train exteriors.  These systems are currently used on High Speed Trains, Main Lines, Intercity, Suburban Trains, Metros and Light Rail. Passenger Train Interiors The Mäder Group proposes a wide range of...

Henkel Deoxidiser 7/17

HenkelFeatures & Benefits: Deoxidiser 7/17 is a deoxidising process for aluminium and its alloys. Deoxidiser 7/17 baths have the unique ability to prevent the deposition of metallic copper on aluminium during production Deoxidising/Desmutting operations. Deoxidiser 17 Replenisher (code 79312) is used to replenish and maintain at maximum efficiency baths which have been made up with...

Turco® 4215 NC-LT non-silicated, non-chromated, mildly alkaline cleaner

HenkelFeatures & Benefits: Turco® 4215-NC-LT is a white granular mix developed for cleaning ferrous and non-ferrous alloys commonly used within the aerospace industry, by spray, immersion, and ultrasonic methods at low temperatures. It is ideal for cleaning fuel and hydraulic components and for cleaning metals prior to metal bonding. Turco® 4215-NC-LT is not recommended...

T-4460 EA CLEANING SOLVENT

HenkelFeatures & Benefits: TURCO 4460 is a water-white liquid formulated to replace methyl ethyl ketone and similar solvents and to meet the basic Boeing specification covering wipe solvents. TURCO 4460 is ideal for hand-wipe cleaning of metal surfaces prior to painting or bonding and for cleaning bearings, instruments and electronic components.   Please contact...

Turco® 2-K Maskant

HenkelFeatures & Benefits: Turco® 2-K Maskant is a 100% solids, two component, polyurethane based, air curing, hand peelable coating that provides protection to metallic surfaces during mechanical fabrication and chemical processing. Due to its advanced chemistry, Turco® 2-K Maskant’s rapid cure allows the user to process coated parts much faster than with conventional maskants,...

Brush Alocrom 1200

HenkelFeatures & Benefits: A rapid process which forms a protective golden coloured conversion coating on aluminium and its alloys. Outside the UK, the Alocrom range of products are marketed under the Alodine trade name. The Brush Alocrom 1200 process is designed for treating aluminium and aluminium alloy surfaces which are too large for normal...

Alocrom 1200 Dip

HenkelFeatures & Benefits: A rapid non-electrolytic dip process which forms a protective golden coloured chromate coating on aluminium and its alloys. Alocrom 1200  is ideal for coating all types of aluminium and aluminium alloys including high silicone pressure die-castings. It should be used on aluminium wherever maximum corrosion resistance is required, and is suitable...

Henkel Touch-N-Prep 1132 Alodine Pen

HenkelFeatures & Benefits: The Henkel Alodine 1132 Touch-N-Prep pen is designed to save labor, material, and time when applying a dry-in-place military specification approved chromate conversion coating for touch-up applications. Its proper use also reduces worker contact to chromating solutions and waste, such as rinse water generated from a chromating process. Before starting the...

Fill Bond Putty

Features & Benefits: Fill Bond putty is specifically formulated for aerospace applications.  Designed to fill rivets, seams and small spot-repair areas on aircraft exteriors, and available in an epoxy version.  It is applied using a manual or pneumatic (air-powered) twin-tube cartridge dispensing gun which automatically mixes the two components to the correct ratio as the...

Zip-Chem Cor-Ban Corrosion Inhibiting Compounds (CICs)

Zip-ChemFeatures & Benefits Especially formulated for the demanding specifications of aviation maintenance Products are for use on large structural components, small parts, avionics and cables Products meet most specifications such as QPL BMS 3-35, MIL-DTL, MIL-PRF, NSN, BAMS, Airbus Product Recommendations: Static Joints: Non-chromated, non-drying paste effective on a wide range of static joint applications...

PreKote Suface Treatments

A unique formula, PreKote® Surface Pretreatment is a non-chromated surface pretreatment utlising a safe, hazard-free technology. PreKote® offers superior adhesion, improved paint flexibility and advanced corrosion protection on painted surfaces relative to traditional chromate and conversion pretreatments. PreKote® has passed stringent testing by the US DoD, Boeing and other coating industry leaders. Features & Benefits Non-toxic Non-corrosive Non-flammable...

CM0560566 Epoxy Sanding Surfacer

Sherwin WilliamsFeatures & Benefits: Two component sanding surfacer designed for application over anti-corrosive primers: CM0483660, CM0483928 and CM0483505. Proven product which has been applied extensively at OEM and maintenance facilities for decades Excellent sanding characteristics Please contact us if you require further information on this product.

CM0484684 Wash Primer

Sherwin WilliamsFeatures & Benefits: A two component, vinyl wash primer for use as an aluminium pretreatment, where Alocrom/Alodine or anodised treatment is not required. Designed to work with Sherwin-Williams’ anti-corrosive primers. Designed to meet the military specification DOD-P-15328 Please contact us if you require further information on this product.

CM0483928 High Solids Corrosion Resistant Epoxy Primer

Sherwin WilliamsFeatures & Benefits: High performance, high solids, low VOC, two component, green anti-corrosive epoxy primer, intended for use on Skydrol-carrying aircraft over a suitably pretreated surface (eg. Wash Primer CM0484684 or Alocrom/Alodine). Excellent corrosion and chemical resistance Meets the performance criteria of BMS 10-72, MIL-P-23377 Type I, Class C Contains less than 2.9lbs VOC...

CM0483660 Corrosion Protective Epoxy Primer

Sherwin WilliamsFeatures & Benefits: High performance, two component, green anti-corrosive epoxy primer for use on all types of aircraft. Excellent corrosion, chemical and impact resistance Proven product which has been applied extensively at OEM and maintenance facilities for decades Designed to meet MIL-P-23377F Can be used in conjunction with surfacer CM0560566 or CM0560563 Please contact us if...

CM0483505 High Solids Corrosion Resistant Epoxy Primer

Sherwin WilliamsFeatures & Benefits: High performance, high solids, low VOC, two component, green anti-corrosive epoxy primer. this high performance epoxy primer is intended for use on all types of aircraft and its benefits include ease of application, smoothness and economy of coverage. Contains less than 2.9lbs of VOC per mixed gallon or 350 grams per...

CM0481968 Chrome Free Epoxy Primer / Surfacer

Sherwin WilliamsFeatures & Benefits: High performance, low VOC, two component anti-corrosive epoxy primer and surfacer which contains no chrome. Provides corrosion resistance without use of chrome Dries to a smooth finish Meets the performance criteria MIL-P-23377 Type I, Class N and Boeing BMS 10-79 Contains less than 2.9lbs of VOC per mixed gallon or 350...

CM0481810 High Solids Urethane Surfacer

Sherwin WilliamsFeatures & Benefits: High solids urethane surfacer intended for use on aircraft and other aerospace applications. Fast drying, designed for sanding in 7-8 hours at 25oC Excellent smoothness and sanding characteristics Less than 2.9lbs of VOC per mixed gallon or 350 grams per litre Designed for use over Sherwin-Williams’ High Solidscorrosive primer CM0483505 and...

CM0480922 Spread n’ Spray Spot Primer

Sherwin WilliamsFeatures & Benefits: Spread n’ Spray spot primer is a high build filler which can be applied by spraying or spreading. As it can be spread onto a repair area, Spread n’ Spray can be worked into rivets, pin holes and seams without needing to mask, tape and spray. Provides excellent adhesion Free of...

PF-SR Sealant Remover & Surface Cleaner

PF-SR Sealant Remover is a heavy duty high flash point residue-free solvent based cleaner and degreaser for effective surface cleaning of sealant residue, fabrications soils and marking ink during Aerospace MRO & OEM parts cleaning operations. Available in liquid and pre-saturated wipes that can be manufactured with a low lint cloth compliant to AMS...

3M ClipperTM High Temperature Masking Tape 7130

3M3M-7130-24 / 3M-7130-48 A chamois coloured creped high temperature paper masking tape specially designed to withstand single or repeat bake cycles in the temperature range of 1500C to 1700C for varying periods. Good curve masking Solvent resistance prevents paint bleed through Good handling Specially crosslinked rubber resin adhesive gives controlled adhesion and clean removal...

3M ClipperTM Low Adhesion Masking Tape 7120

3M3M-7120-24 / 3M-7120-48 A chamois coloured creped paper masking tape for applications on sensitive materials such as anodised metals like aluminium and titanium, treated wood, coatings or other critical surfaces. it is specially designed for those applications where a less aggressive adhesive is important. This tape an be used for most painting applications and...

3M Plastic Film Tape 471

3M3M-471-25 Vinyl plastic film with a synthetic rubber adhesive designed for coding, abrasion protection, decoration, sealing, patching, splicing and general purpose applications. Available in transparent and 10 other colours Long life Readily conformable to irregular surfaces Abrasion resistant Dead stretch properties mean it provides straighter line for masking, marking and sealing applications Translucent synthetic...

3M ScotchTM General Purpose Masking Tape 2211

3M3M-2211-25 / 3M-2211-50 Chamois coloured creped paper masking tape designed for fixing, bundling, holding and sealing applications as well for short term paint masking up to a temperature of 700C Good curve masking Reduces paint build-up and provides good paint lines Solvent resistance prevents paint bleed through Good handling Good paint flaking resistance Easy...

Spray Gun Cleaning Systems

We supply a range of water based spray gun cleaning machines offering varying functions and capacities. Please contact PSG for details.

Paint Can Washer

Can washers are normally made to order and can be designed for multiple cans of varying sizes, suitable for water or solvent based paints.  Please contact us if you require further information on any of these products.

Solvent Recyclyer / Spray Gun Cleaner

Combination system for the cleaning of spray guns and recycling of used solvent. Automatic spray gun cleaning Manual washing and rinsing 5 year pump warranty 25 litre recycle capacity Can be used independently as a recycler Fully certificated to EEx d standards Explosion proof controls Removes solvent waste disposal costs Automatic operation Low running...

Solvent Recycler

Reduces solvent waste disposal costs and solvent purchases. Up to 95% solvent recovered Available in 25 litre or 60 litre capacity Economic to run In many cases reduces VOC consumption below licensing level Low maintenance Explosion proof controls Automatic operation Stainless steel construction 3.5-5 hour (25 litre capacity) or 5-7 hour (60 litre capacity)...

Measuring Instruments

Flow Cups PSG supplies a range of flow cups to measure the viscosity of paints and varnishes, all engineered to the relevant national standards, including: Afnor BS3900 DIN 53.211 ASTM D1200 ASTM D 4212 Zahn All cups are precision engineered from hard aluminium alloy. Certificates of Conformity or Calibration can be supplied for any...

Air Fed Masks

PSG supply a comprehensive range of masks for paint sprayers, together with spare parts and accessories. DeVilbiss MPV air-fed face visor and half mask breathing outfits single supply line provides both spraying and breathing air lightweight moulded visor construction for maximum comfort ratchet visor headband adjustment is fast and convenient, hinged visor with flip...

Zip-Chem Sur-Prep

Zip-ChemFeatures & Benefits: Range of avionics and general-purpose surface preparation cleaners. Products offer specific performance advantages in relation to efficiency, flammability, VOCs and other related environmental concerns. Products meet most specifications such as BMS10-127, MIL-PRF, Boeing, ASTM. Product Recommendations: Avionics, Electronics & Cables D-5603NS – A-A 58060, FSN:6850-405-9385, DPM6372 D-5605NS – A-A 58060, UAL...

Zip-Chem Aero-Lub

Zip-ChemFeatures & Benefits Includes multi purpose greases, silicones, Teflon and graphite lubricants. Products are available for high temperature areas, applications requiring penetrating lubricants and prevention of ice build-up on rubber seals. Products meet most specifications such as AMS, BMS, NSN, ASTM. Product Recommendations: Engine & High Temp Areas D-5035NS – DPM 5217 D-5440NS – ...

Zip-Chem Calla

Zip-ChemFeatures & Benefits: Full range available for interior and exterior cleaning Products include large surface cleaners for aircraft exteriors, parts cleaners, glass cleaners, degreasers, drywash and polishing products Disinfectants, odour neutralisers Products meet most specifications such as AMS 1650, MIL-PRF, Boeing, NSN Product Recommendations: Exterior Cleaning Products: Exterior Cleaner: Calla 301A – DfE One...

Binks Pressure Tanks

Constructed from high grade materials and fully compliant with European and global pressure regulations including PED, ATEX and ASME fully approved and CE marked to the latest pressure equipment directive 97/23/EC constructed from heavy gauge steel with forged steel clamps St St and carbon steel plated range covers all industrial applications high pressure rating...

3M Paint Preparation System

3MAn innovative and unique system for the mixing and preparation of refinish material prior to spraying. Features & Benefits: only one pot for mixing and spraying closed system – no outside contamination up to 70% saving of cleaning solvent less operator exposure to solvents and reduction in VOCs faster system – from mixing to...

Vector Electrostatic Spray Gun

This new electrostatic gun range features improved paint atomisation, transfer efficiency, durability and operator comfort with greatly simplified controls. superior atomisation and transfer efficiency light weight wtih improved operator ergonomics excellent durability quick and simple operation easy to clean and maintain

Ransburg Vector Solo

Model 65kV Cordless, compact electrostatic finishing suitable for applying solvent based materials. Features & Benefits: compact, lightweight, cordless design ergonomically balanced low trigger pull force replaceable cascade low motor spped minimises vibration CE marked and fully ATEX approved Typical applications: aerospace industry general metal spraying commercial and off-road vehicles intricate metal components Model AA90 Cordless,...

All Purpose Full Size Compliant Primer Spray Gun

Large spray patterns & even material distribution Suitable for all types of primers, surfacers, fillers & polyesters Air adjuster valve on the gun handle allows instant pressure control Balanced air valve design for lighter trigger pull & improved air flow Tough & durable drop forged aluminium gun body Paint cup includes integral filter &...

GTi HD Full-Size Compliant Spray Gun Range

Features & Benefits: Exceptional atomisation quality Trans-Tech fully EPA compliant for superior material transfer efficiency & significant paint savings High speed application with consistent lay-down & superior finish Balanced air valve design for lighter trigger pull & improved air flow Tough, corrosion resistant anodised gun body Modular components for easier, faster servicing Precision high...

EC75 Epoxy Finish

PPG AerospaceFeatures & Benefits: EC75 is a two-pack, ambient curing, epoxy finish possessing good adhesion and high chemical resistance. This combination of properties makes it an ideal topcoat to enhance the protection of either epoxy or polyurethane primers used on the internal structure of aircraft by providing an easily cleaned finishing coat which has high...

CA7041 Low VOC Chromate Containing Polyurethane Primer

PPG AerospaceFeatures & Benefits: CA7041 is a two-pack low VOC solvent-borne polyurethane primer suitable for application on pretreated Aluminium. CA7041 is intended for use on military vehicles and equipment. CA7041 offers ease of application and quicker drying times than waterborne products. Short time between application of primer and topcoat typically 1 hour. For details of...

CA7040 Chromate Free Polyurethane Primer

PPG AerospaceFeatures & Benefits: CA7040 is a two-pack low VOC solvent-borne polyurethane primer suitable for application on aged alkyd coatings as well as on steel. CA7040 is intended for use on military vehicles and equipment. CA7040 offers ease of application and quicker drying times than waterborne products. Short time between application of primer and topcoat,...

Jet Glo Express

Jet Glo ExpressFeatures & Benefits: High solids, high performance, multi-component polyester urethane, designed for exterior use on high performance general aviation, business jets and commercial aircraft. Jet Glo has outstanding high-gloss appearance, durability and Skydrol fluid resistance with Sherwin-Williams Aerospace primers. This coating meets the performance requirements of MIL-PRF-85285 Revisions C and D, AMS 3095A, BMS...

Acry Glo Metallic

Acry GloFeatures & Benefits: Acry Glo Basecoat / Clearcoat is a high performance, multi-component acrylic urethane designed for use as feature stripes over cured Jet Glo and/or Acry glo basecoats. This product requires the CM0571080 Acry Glo clearcoat. Wide range of metallic colours A proven performance coating in the aviation industry for over 20 years...

Acry Glo

Acry GloFeatures & Benefits: Acry Glo is a high performance, multi-component acrylic urethane designed for use on aircraft. This product is designed to have the flexibility to use for striping as well as for painting helicopters and smaller aircraft. A proven performance coating in the aviation industry for over 20 years Fast drying Superior depth...

JetFlex Cabin Interior Solvent Based Polyurethane Finish

Features & Benefits: Designed for the finishing of plastic and metal components within the cabin and cockpit area of aircraft. Approved to BMS 10-83D Type II and Type III specification. Meets the performance of FAA FAR 25.853 regulation for burn, smoke and heat release. Applied direct to substrate, or over JetFlex primer CM0480930 Fast...

JetFlex WR Cabin Interior Water Reducible Finish

Features & Benefits: Low VOC, one component water reducible polyurethane finish, intended for cabin interiors, as a smooth or textured coating. Suitable for plastic and metal components within the cabin and cockpit areas. Meets the flammability requirements of BMS 10-83 and FAA FAR 25.853. Applied direct to substrate, or over Sprayfil CM0481505 – a one component, low...

Filler & High Gloss Varnish 19556

Features & Benefits Two component polyurethane acrylic resign varnish with high filling capacity and outstanding transparency.  For high gloss, closed pored surfaces with brilliant smoothness in the galley, bathroom and cabin areas. Halogen free Easy to spray Fast drying Peroxide-resistant Lightfast Hard and viscoplastic Resistant to PVC seals Can be polished and buffed Please contact...

Filling compound 19600

Features & Benefits: Two component, colourless high gloss, pore filling compound for use in the galley, bathroom and cabin areas. Halogen free Fire retardant Used for filling out coarse pored timber or flawed surfaces Can be used on timber bleached with hydrogen peroxide or CLOU bleaching agents without causing any discolouring Applied using handheld...

Filler Primer 19564

Features & Benefits: Particularly high-filling, transparent two component polyurethane acrylic resin primer with a wide range of applications. Halogen free Fire retardant High solids Fast drying – dust dry in 30 minutes, can be overcoated in 3-4 hours Good sanding properties Lightfast Peroxide-resistant Contains no formaldehyde With UV absorber Available in 5 and 10...

High Gloss Varnish 19555

Features & Benefits: Clear, high gloss, low viscosity, two component varnish with high solids content based on polyurethane / isocyanate. Halogen free Fire retardant Used as a special blocking primer mixture for tropical / exotic wood Easily sprayed Dust dry in 2 hours Can be overcoated after drying overnight Available in 0.9, 2.5, 4.5 &...

Impregnating Agent 19586

Features & Benefits: One component, impregnating agent for flame retardant coating system. Halogen free Helps reduce flammability of varnished surfaces Can be used on timbers bleached with hydrogen peroxide or CLOU bleaching agents without discolouring Easily sprayed Available in packs of 5 and 10 litres Please contact us if you require the Technical Data Sheet or further...

515K011 Super Koropon®

PPG AerospaceFeatures & Benefits: Super Koropon® fluid resistant interior primers are conventional solids, chemically cured, lead and cadmium free epoxy primers. These high performance primers are formulated to protect the interior of aircraft from filiform and exfoliation corrosion. Super Koropon® fluid resistant interior primers have excellent adhesion to a variety of substrates and exhibit a...

PR205 Low VOC Epoxy Primer

PPG AerospaceFeatures & Benefits: A two-pack, ambient curing, low VOC, epoxy primer developed for the internal and external protection of aircraft, and for resistance to microbial attack in fuel tanks. The base component contains strontium chromate for long-term corrosion inhibition. For details of schemes incorporating this product please consult PSG Technical Department – +44 (0)1428...

PR 143 Epoxy Primer

PPG AerospaceFeatures & Benefits: PR 143 is a two-pack, ambient curing, epoxy primer developed for the internal and external protection of aircraft. The base component contains strontium chromate for long term corrosion inhibition. Fully cured PR 143 possesses excellent resistance to aircraft fluids such as phosphate ester hydraulic oils and, combined with its superior water...

Can Crusher

Saves money on waste disposal costs Air operated Fully automatic Compaction up to 80% Double acting Pneumatic Cylinder Safety Interlock 1900 lb / 865 kg force Model UCC-20 Crushes 1 to 6 litre paint or thinner cans in one simple operation Bench or wall mounted Model UCC-25 5500 lb / 2500 kg force Crushes...

SKYscapes

SkyScapesImagine being able to cut as much as 30% from your painting process time. SKYscapes® basecoat-clearcoat paint system saves time and money, while still providing the superior appearance and durability that the aviation industry expects from Sherwin-Williams Aerospace. Paint Planes Faster This new system cures at ambient temperature in half the time of other...

CA8360 Low VOC Polyurethane Topcoat, Near-Matt

PPG AerospaceFeatures & Benefits: CA8360 (standard quality) and CA8360R (IR reflecting) are high solids, VOC compliant, polyurethane topcoats possessing excellent chemical resistant properties. As such they are intended for use both as internal topcoats for aircraft structural components as well as external topcoats for military aircraft and equipment. As external topcoats CA8360 and CA8360R possess...

CA8351 Low VOC Polyurethane Topcoat, Semi-Matt

PPG AerospaceFeatures & Benefits: CA8351 is a high solids, VOC compliant, polyurethane topcoat possessing excellent chemical resistant properties. As such it is intended for use both as an internal topcoat for aircraft structural components as well as an external topcoat for military aircraft and equipment. As an external topcoat CA8351 possesses excellent UV resistance and...

Jet Glo

Jet GloFeatures & Benefits: High performance, multi-component polyester urethane, designed for exterior use on high performance general aviation, business jets and commercial aircraft. Jet Glo has outstanding high-gloss appearance, durability and Skydrol fluid resistance with Sherwin-Williams Aerospace primers. Proven performance within the aviation industry for over 25 years, used by OEMs including Bombardier, Cessna, Falcon...

MIL-PRF-23377, Type I, Class C

Sherwin Williams Chemical CoatingsTwo component, chromated epoxy polyamide primer. Suitable for steel, aluminium, galavanised and other metals. Features & Benefits: Used as the primer under MIL-PRF-85285 polyurethane topcoats, or polyurethane chemical agent resistant coatings (CARC) specified in MIL-C-53039 and MIL-C-46168, or MIL-PRF-22750 epoxy topcoat 2.8 lb/gal VOC Fast drying Excellent chemical, solvent and corrosion resistance For aluminium...

MIL-PRF-22750

Sherwin Williams Chemical CoatingsTwo component, high solids epoxy topcoat for use as an interior Chemical Agent Resistant Coating (CARC) for the interior of military ground equipment. Primers must be applied under the CARC topcoat. Suitable for steel, aluminium, galavanised and other metals. Available in: F91W226 White, 17925 F92G227 Seafoam Green, 24533 Features & Benefits: 2.8lb/gal VOC compliant...

MIL-DTL-53022 Type I

Sherwin Williams Chemical CoatingsConventional solid, two component, lead and chromate free epoxy primer. Available in E90W201 White Features & Benefits: May be used as the primer under MIL-PRF-85285 (non-aircraft) polyurethane topcoats or polyurethane chemical agent resistant coatings (CARC) specified in MIL-DTL-53039 and MIL-C-46168, or MIL-C-22750 epoxy topcoats Complies to Rule 102, South Coast Air Quality Management District,...

DOD-P-15328

Sherwin Williams Chemical CoatingsPretreatment, two component, acid catalysed vinyl wash primer used for clean metal surfaces. Suitable for steel, aluminium, galavanised and other metals. Available in E90G4 green. Features & Benefits: Used to enhance adhesion of the coating system Increases adhesion of topcoat Fast drying Conforms to Navy Formula 117 Please contact us if you require further information on...

MIL-DTL-53039

Sherwin Williams Chemical CoatingsSingle component aliphatic polyurethane camouflage Chemical Agent Resistant Coating (CARC) for military equipment. Primers must be applied under the CARC topcoat. Suitable for steel, aluminium, galavanised and other metals. Available in: F93G106 Green 383, 34094 F93B110 Black, 37030 F93H113 Tan 686, 33446 Features & Benefits: Single component 1.5lb/gal VOC HAPS free Fast solvent and...

MIL-DTL-64159 Type II

Sherwin Williams Chemical CoatingsTwo component, waterborne polyurethane – Chemical Agent Resistant Coating (CARC) for military equipment. Primers must be applied under the CARC topcoat. Suitable for steel, aluminium, galavanised and other metals. Available in: F93G504 Green 383, 34094 F93G505 Aircraft Green 34031 F93N505 Brown 383, 30051 F93B505 Black, 37030 Features & Benefits: VOC of less than 1.50lb/gal...

JetFlex Primers

JetFlex Water Reducible Sprayfil CM0481505 A one component, low VOC, acrylic latex developed to fill and hide profile and surface imperfections on foam plastics, metal and wood for aircraft cabin interior application. Features & Benefits: one component water reducible coating can be used under both JetFlex Solvent Based Polyurethane Finish and JetFlex WR Water...

MIL-DTL-53022 Type II

Sherwin Williams Chemical CoatingsA two component, high solids, 3.5 VOC, lead and chromate free epoxy primer, which may be used as a primer under MIL-PRF-85285 (non-aircraft) polurethane topcoats or polyurethane chemical agent resistant coatings (CARC) specificed in MIL-DTL-53039 and MIL-C-46168 or MIL-C-22750 epoxy topcoat. Available in E90H226 Buff. Features & Benefits: 3.5lb/gal VOC Fast drying – can...

PR30B Etch Primer

PPG AerospaceFeatures & Benefits: PR30B is a two-pack, ambient curing, etch primer designed to provide the maximum possible resistance to filiform corrosion. PR30B promotes excellent adhesion between epoxy and polyurethane primers and a variety of light alloys and steel. For details of schemes incorporating this product please consult PSG Technical Department – +44 (0)1428 651246....

Binks Raptor Max Spray Packages

Five Year pump warranty Magnetic detent design (patent) for quick stroke change over with no pulse or surge Stainless Steel system – pump and gun All new air assisted airless and airless guns provide latest atomisation technology Modular design for reduced maintenance & down time Self adjusting spring loaded packings with large sight glass...

Devilbiss HD Spray Gun System

The All Purpose Mid-Size Compliant Spray Gun Range Features & Benefits: Robust, lightweight & work friendly design for high demand outputs Balanced air valve design for lighter trigger pull & improved air flow Trans-Tech compliant and HVLP air caps provide superior finish with the best possible paint savings & transfer efficiency Contoured handle design...

CA7045 Low VOC Polyurethane Primer

PPG AerospaceFeatures & Benefits: CA7045 is a quick drying, high solids, VOC compliant, chromated primer which exhibits excellent wetting and adhesion characteristics. It can be applied to suitably pre-treated aluminium alloys and has been specifically designed for the long term corrosion protection of aircraft structural components, including fuel tanks. The product exhibits excellent chemical resistance...

Top Coat F70-A

This is a semi gloss water based epoxydic topcoat for aircraft structures protection.  This product has a high chemical resistance. Specifications Airbus AIMS 04-04-003, AIMS 04-04-040, AIMS 04-04-041 (PQ no 10050-240-01) / ABP 4-2130 (Airbus UK) DGQT 1.7.0.0120 (Dassault) Product code: 21070100B004L Please contact us if you require any further information on this product.

Primer P60-A

Water based epoxydic primer with strontium chromate, highly chemical resistant for aircraft structure for treatment of aluminium Specifications Airbus (PQ no 10050-230-01) AIMS 04-04-001,  AIMS 04-04-004, AIMS 04-04-038, AIMS 04-04-040, AIMS 04-04-041, AIMS 04-04-042. ABP 4-1123 (Airbus UK) Bombardier : BAMS 565-01 Class A Grade B meets with Boeing BMS 10-11 Type 1 Class B...

Structural Adhesives

 ARALDITE 2004 ADHESIVE 1.4KG KIT ARALDITE 2005 ADHESIVE 2KG KIT ARALDITE 2010-1 ADHESIVE 50ML CART ARALDITE 2010-1 ADHESIVE 200ML CART ARALDITE 2011 200ML (2x 100ML TUBES) ARALDITE 2011 ADHESIVE 200ML CART ARALDITE 2011 ADHESIVE 2KG KIT ARALDITE 2011 ADHESIVE 50ML CART ARALDITE 2012 200ML (2x 100ML TUBES) ARALDITE 2012 ADHESIVE 200ML CART ARALDITE 2012...