9100/M9001 Low VOC Polyurethane Topcoat – Abrasion Resistant

PPG AerospaceFeatures & Benefits: 9100 is a VOC compliant, chemical resistant polyurethane  topcoat designed to provide a high degree of abrasion resistance. It is intended for use on surfaces where there is a high risk of abrasion due to contact with moving parts. The product has excellent UV durability, chemical resistance and is easy to apply...

7641/3600 P99 Etch Primer

PPG AerospaceFeatures & Benefits: P99 is a two-pack, ambient curing, etch primer designed to provide high resistance to filiform corrosion. P99 promotes excellent adhesion between polyurethane primers such as PAC33 and PAC33CF and a variety of light alloys and steel. Specifications – Approval Airbus AIMS 04.04.012 TN A.007.10113 Dassault IC Specifications – Performance UK MOD...

5467/0000 Pore Filler PU66

PPG AerospaceFeatures & Benefits: PORE FILLER PU 66 5467 is a two-component, polyurethane, low-density, sandable pore filler, characterized by its flexibility and hardness. Improvement of the aspect of laminates: Epoxy glass:  Polyester – glass: Carbon – epoxy: Aramid-epoxy: Specifications – Approval Airbus: AIMS 04-04-011 IC DASSAULT   Please contact us if you require further information on...

5440/**** PU 66 8H Glossy colours

PPG Aerospace Features & Benefits: PU 66 is the two-component flexible polyurethane topcoat of the conventional solids PU 66 system, resistant to filiform corrosion.  PU 66 is used as an internal and external protection and decoration of aircraft, with excellent resistance properties. Resistant to : – Impact – Water soak – Synthetic and mineral lubricants – Phosphate-ester hydraulic...

528X306 Conductive Coatings

PPG AerospaceFeatures & Benefits: DeSoto® conductive coatings are conventional solids, carbon filled, epoxy-amine coatings with controlled conductive properties. These high performance coatings are designed to obtain surface conductivity on non-conductive (composite and other plastics) substrates. Additionally, DeSoto® conductive coatings control static charge bleed-off on radomes, antennas, and other insulative parts. DeSoto® anti-static coating (528X306) is...

519X303 primer DeSoto® High Temperature Coatings

PPG AerospaceFeatures & Benefits: DeSoto® high temperature coatings are organic chemically cured systems that can withstand an operating temperature of 400°F (204C°) and in some applications 450°F (242°C). These high temperature coatings are designed to be applied over aluminum and composite surfaces. DeSoto® high temperature coatings have superior film properties including corrosion resistance.  DeSoto® high...

4355/3600 PAC33 polyurethane primer

PPG AerospaceFeatures & Benefits: PAC33 is a two-component, ambient curing, corrosion resistant polyurethane primer, characterized by high chemical resistance and flexibility, and is designed to be used over P99 etch primer for the exterior finishing of civil aircraft, or to be used over chemically pre-treated alloy for interior or exterior parts. PAC33 is not recommended...

KS35 Chromate Free Epoxy Knifing Stopper

PPG AerospaceFeatures & Benefits: KS35 is a low VOC, chromate-free, Epoxy based knifing stopper for direct application to composites and already primed metallic substrates. Unlike polyester stoppers, KS35 has very good water and Skydrol resistance. The stopper can be overcoated with epoxy primers and polyurethane primers, including waterborne epoxy primer-surfacer CA5413. Specifications – Approval AIMS...

FR80 Epoxy Filler

PPG AerospaceFeatures & Benefits: FR 80 is a two-pack, ambient curing, pigmented epoxy filler possessing excellent durability and chemical resistance. This combination of properties makes it an ideal ground coat to enhance the appearance of either epoxy or polyurethane topcoats used on the external structure of aircraft. FR 80 is approved to the following specification:...

FE 93 polyurethane gloss finish

PPG AerospaceFeatures & Benefits: FE 93 is a two-pack, ambient curing, non-yellowing, polyurethane finish possessing excellent gloss retention and resistance to aircraft fluids including phosphate ester hydraulic oils. For details of compatible primers please consult the FE 93 Scheme Sheets. Fully cured FE 93 possesses excellent fluid resistance and adhesion characteristics. FE 93 is approved...

FE103 flexible polyurethane matt finish

PPG AerospaceFeatures & Benefits: FE103 is a two-pack, ambient curing, non yellowing, flexible polyurethane matt finish possessing good durability, excellent adhesion characteristics and resistance to aircraft fluids including phosphate ester hydraulic oils on suitably primed external surfaces of aircraft. FE103 is approved to the following specifications: BS2X34B, AFS1605, MM0114 Please contact us if you require further...

F580-2080 Improved Adhesion Epoxy Primer

PPG AerospaceFeatures & Benefits: F580-2080 is a 2 component, strontium chromate based epoxy primer  which exhibits excellent adhesion characteristics. It can be applied to suitably pre-treated aluminium alloys and is specifically designed for the long term corrosion protection of aircraft structural components, including fuel tanks. The product exhibits excellent chemical resistance and flexibility and as such is...

CA 8000 series Desothane® HS polyurethane topcoats

PPG AerospaceFeatures & Benefits: Desothane® HS topcoats are VOC compliant, polyurethane, chemically cured topcoats used to protect the exterior of aircraft. These topcoats are designed to be applied over conventional as well as high solids epoxy primers to provide maximum performance. Desothane® HS topcoats have excellent durability against weathering, excellent appearance, and are easy to...

CA7012 low VOC chromate free epoxy primer

PPG AerospaceFeatures & Benefits: CA7012 is a two-pack, ambient curing, low VOC, high solids, chromate-free epoxy primer developed for the protection of aluminium and composite structure. Please contact us if you require further information on this product.

ARC 2 abrasion resistant polyurethane finish

PPG AerospaceFeatures & Benefits: ARC 2 is a two pack, ambiant curing, abrasion resistant, polyurethane finish which dries to an eggshell gloss with a slightly textured appearance which has high resistance to abrasion and excellent resistance to aircraft fluids including de-icing fluids and phosphate ester hydraulic oils.  ARC 2 is reinforced with PTFE and is...

CV116 clear polyurethane gloss coat

PPG AerospaceFeatures & Benefits: CV116 (formerly F427-943) is a two-pack, ambient curing, clear, polyurethane gloss coat with a high degree of cross-linking to give maximum chemical and fluid resistance. Fully cured CV116 shows maximum gloss retention on weathering and is designed to give external protection to polyurethane gloss finishes. Specifications – Approval Airbus ABP4-2128, ABP...

PR205 Low VOC Epoxy Primer

PPG AerospaceFeatures & Benefits: A two-pack, ambient curing, low VOC, epoxy primer developed for the internal and external protection of aircraft, and for resistance to microbial attack in fuel tanks. The base component contains strontium chromate for long-term corrosion inhibition. For details of schemes incorporating this product please consult PSG Technical Department – +44 (0)1428...

PR 143 Epoxy Primer

PPG AerospaceFeatures & Benefits: PR 143 is a two-pack, ambient curing, epoxy primer developed for the internal and external protection of aircraft. The base component contains strontium chromate for long term corrosion inhibition. Fully cured PR 143 possesses excellent resistance to aircraft fluids such as phosphate ester hydraulic oils and, combined with its superior water...

CA7045 Low VOC Polyurethane Primer

PPG AerospaceFeatures & Benefits: CA7045 is a quick drying, high solids, VOC compliant, chromated primer which exhibits excellent wetting and adhesion characteristics. It can be applied to suitably pre-treated aluminium alloys and has been specifically designed for the long term corrosion protection of aircraft structural components, including fuel tanks. The product exhibits excellent chemical resistance...