Krempel

PSG is a distributor of Krempel’s range of tooling prepregs. As a family-owned company, the KREMPEL-GROUP is an independent producer of high quality semi-finished products and a leading global systems supplier modern materials. The group enjoys an excellent reputation worldwide and is among the global market leaders in many areas with its electric insulations,...

Gurit

Gurit has established itself as a developer and innovator in the composites industry and positioned itself as the leading global supplier of composite materials, engineering services, tooling equipment, and select parts and systems. Over 30 years experience in the practical application of composites across various market sectors and projects, from small parts to large-scale...

Flashtape 200

Flashtape 200 range is made of polyester tape backed with a fully pressure silicone adhesive or with an acrylic rubber adhesive (A). Flashtape 200 is commonly used to keep all bagging materials plies in place like peel ply, release film and breathers. Flashtape 200 is also used to protect tooling parts and some component...

LG230

LG230 is a high temperature sealant tape suitable for autoclave applications up to 232℃(450 ℉). LG230 exhibits excellent characteristics and is the result of a long research performed in our R&D department. LG230 is easy to use for making vacuum bag at room temperature, excellent at high temperature and high pressure achieving safe cures...

LG2000

Excellent tackiness, high temperature tape. Ideally suited to compaction operations at high temperature of 199℃(390 ℉) and seal applications and widely used in autoclave process. Material compatible with most laminate(including composites tools)and film materials. It has slightly lower tack and excellent clean-up on any surface.     Please contact us if you require further information...

LG150

LG150 is a low/medium temperature sealant tape used for vacuum bag confection. LG150 is successfully used in industries like Wind Energy and Marine for infusion process. It could be also used in other industries for room temperature debulking cycles and low temperature/low pressure curing cycles. LG150 exhibits good adhesion (tack) properties and stick easily...

WF330

WF330 is a non woven polyester felt widely used in vacuum bagging process for cures in oven and autoclave up to 205℃(401 ℉) and 7 bars max. This medium weight allows to breath air out from the vacuum bag and bleed excess of resin. In case of large excess of resin two or more...

WF10

WF10 is a non woven polyester felt widely used in vacuum bagging process for cures in oven and autoclave up to 205℃(401 ℉). WF10 is an economical version of our WF330 and despite it could be used up to 205℃(401 ℉)we recommend our customers to use this breather at medium temperature and medium pressure,...

WF150

WF150 is a light non woven felt Polyester bleeder & breather fabrics, widely used in low temperature and middle temperature during debulking/compaction cycles under vacuum only. WF150 helps to breath air outside the vacuum bag and volatile. Its low weight limits its use as both breather and bleeder functions as the same time. Some...

LVF200G

LVF200G is a green-tinted, heat-stabilized, co-extruded film modified from a modified Nylon resin, it is a high temperature Nylon film which can be used for cures up to 205℃(401 ℉), and recommended as a bagging fillm for advanced composite fabrication and other high-temperature/pressure application where softness, workability, pinhole-free and defect-free film are essential.  

LVBF600Y

LVBF600Y is a high strength, high elongation bagging film for low temperature vacuum application. This multilayer co-extruded vacuum bagging film has excellent resistance to polyester and epoxy resins. LVBF600Y is the widest film available on the market and ideal material for, but not only, production of marine and wind energy structures.

R90HA

R85HA/R90HA is an economical but high strength textile release fabric. It is especially used in Hand Lay-up Process and Vacuum Assisted Resin Infusion which are widely applied in wind blade and marine industry. Each of R85HA/R90HA is heat scoured and stabilized at high temperature. They are free of any release agent or pollution and...

R85PA66

R85PA66 is an excellent porous Nylon 66 peel ply or release fabric, it has been heat scoured and stabilized at high temperature. R85PA66 is free of any release agent or pollution and can be used directly on the surface of the part. After curing it peels quite easily without any residue or small pieces...

LRF315

LRF315 is red milky colored high performance PTFE release film exhibiting excellent elongation and can be used for cures up to 315℃(599 ℉)with any of epoxy, BMI resins. Its high elongation avoids bridging issues on the most complex contoured shapes. This release film is supplied in both perforated and non-perforated versions Standard perforations are...

LRF260

LRF260 is an FEP resin base release film. LRF260 exhibits high elongation and excellent release characteristics. It follows all complicated shape of parts without bridging. Suitable for use with all commonly used resin systems up to 260℃(500 ℉). Color deep red makes it easily detectable on cured laminate. This release film is supplied in...

LRF230

LRF230 is an ETFE resin base release film. Color opaque blue makes it easily detectable on cured laminate. LRF230 exhibits high elongation and excellent release characteristics. It follows all complicated shape of parts without bridging. Suitable for use with all commonly used resin systems up to 230℃(446 ℉). This release film is supplied in...

LRF150

LRF150 is economical, high elongation release film. LRF150 exhibits excellent release characteristics and vertical strength resistance, commonly used in resin infusion process. This release film is supplied in both perforated and non-perforated versions Standard perforations are P3 & P6 but other perforations might be possible under request, please ask our technical team.  

RF260

RF260AP is an adhesive PTFE coated glass fabric. Bonding face is covered with a pressure-sensitive silicone adhesive. RF260AP has an excellent temperature resistance, smooth surface, lower coecient of friction. RF260AP is commonly used as a semi-permanent release coating on tools. It could be used also to protect from ash of resins tools equipments at...

RF320PM

RF320PM is a porous PTFE coated glass fabric. RF320PM has a very low resin absorption capacity and then keep breathing during the whole cure of the part when directly laid up on the surface of the part. It peels off without any effort and keeps safe of delamination light composite structure.  RF320PM can be...

VI200E

VI200E is a 200g/m² PE diamond point shape extruded infusion mesh. This media is commonly used to infuse all size of parts in Wind energy and Marine Markets.  VI200E is used to allow resin feeding and spreading over the component. The PE material is compatible with all kind of resin, polyester, vinylester and epoxy...

VI250E

VI250E is a 250g/m² PE diamond point shape extruded infusion mesh. This media is commonly used to infuse all size of parts in Wind energy and Marine Markets. VI250E is used to allow resin feeding and spreading over the component. The PE material is compatible with all  kind of resin, polyester, vinylester and epoxy...

VI160W

VI160W is a 160g/m² PE knitted infusion mesh. This media is commonly used to infuse all size of parts in Wind energy and Marine Markets.  VI160W is used to allow resin feeding and spreading over the component. The PE material is compatible with all kind of resin, polyester, vinylester and epoxy as long as...

Infusion Tubes

Tube is used to distribute vacuum or resin. It is mainly used in resin infusion process to constiture vacuum channel and resine infusion network.      

Flashtape 300

Flashtape-300 high temperature polyimide tape, backed with a fully cured pressure sensitive silicone adhesive applied to one side. Flashtape 300 is commonly used to keep all bagging materials plies in place like peel ply, release film and breathers for cures up to 300℃(572 ℉).  Flashtape 300 is also used to protect tooling parts and...